MultiSink™ ULTRA Tungsten Carbide Tipped Multisink Countersink Tool

£10.30

The CarbideMax Ultra coating is specifically designed for the toughest countersinking jobs on the planet, including Hardox steel Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and BioCut Blue lubricant. Patience and experience is essential to...
Read More Below


CHOOSE YOUR SPECIFICATION



Videos

The CarbideMax Ultra coating is specifically designed for the toughest countersinking jobs on the planet, including Hardox steel

Succesful results machining these materials requires the right combination of equipment including high torque/slow speed, geared Magnet Drill, like the HMT MAX100 Magnet Drill and BioCut Blue lubricant. Patience and experience is essential to get the best results with these materials including allowing the cutter to cool during the cut to avoid overheating and damaging the cutting tips.

The MultiSink™ is a worldwide unique new Combination Countersink Tool designed and developed by HMT for use with Magnetic Drills, allowing the user to combine the tool with the VersaDrive product range to Broach & Countersink, Drill & Countersink, Tap & Countersink or even Drill, Tap & Countersink in one operation - providing huge time-saving benefits.

The Countersunk hole will be centred by the VersaDrive Tool it is piloted with, meaning that holes are accurately countersunk every time. As the MultiSink hole is self-piloted it will provide a smooth cutting action, preventing the chattering and reduced tool life commonly experienced with standard countersinks.

The MultiSink™ can also be used as dedicated Countersink only tool used with the pilot pin to ensure smooth hole running and exact accuracy every time.

To Tap & Countersink or Drill, Tap and Countersink requires a Magnet Drill with variable speed and reverse features.

Standard 19.05mm Weldon shank for use in all standard magnet drills. The MultiSink™ can be fitted into Morse Taper arbors with 19.05mm / 3/4" Shank fitting for use in pillar drills and radial arm drills.

  • RPM Data & Best Practice Guide

  • Related Products

    Scroll To Top