(Helpful note - the Impact Socket Adapter to connect the ImpactaMag„¢ Reamer to an impact wrench needs to be ordered separate to the set- see the drop down menu below)
The HMT ImpactaMag„¢ HSS reamer is a unique double-use reamer for enlarging and aligning holes in metals and hard materials; with a specially designed cutting geometry that is designed to allow the tool to be used in an Impact wrench or a Magnet drill. When used in an Impact wrench it is secured into a special adapter meaning the tool is easier to control, apply correct feed rate, and withdraw from the finished hole, enhancing tool life. This reamer will also fit into a standard weldon magnet drill arbor, providing a versatile 2 in 1 solution for circumstances where it may be more appropriate to use a magnet drill.
Ideal for steel erectors and bridgework, this is the ideal bridge reamer set featuring some of the most common bolt sizes for structural steel. Used for Network Rail bridge refurbishment and strengthening.
Ideal for modifying and enlarging holes ready for the installation of TCB bolts and friction grip bolts
€¢ ImpactaMag„¢ reamers are secured directly to the impact wrench.
€¢ ImpactaMag„¢ reamers can also be used with any standard Magnet Drill
€¢ ImpactaMag„¢ reamers are now available in intermediate sizes
€¢ UNIQUE 6 flute design for faster, smoother cut
For 1/2" Drive Impact Wrench use 00200-12A-19 HMT ImpactaMag„¢ Adapter
For 3/4" Drive Impact Wrench use 00200-34A-19 HMT ImpactaMag„¢ Adapter
Impact wrench driven reamers are not recommended for use with laser or plasma cut holes. Heat affected holes can be enlarged using the ImpactaMag reamer with a slow speed magnet drill.
|Code||Max Diameter||Enlargement Depth||Start Diameter||Shank Type||Overall Length|