VersaDrive™ Impact Reamers - Imperial Sized

£29.65

Keep the Job Moving when a connection hole is undersized VersaDrive™ Reamers perform the fastest and with less kickback when adapted for use with an Impact wrench for enlarging holes in steel plate up to around 3/4" thick. However, they can also be used in any standard 1/2" cordless or pistol...
Read More Below


CHOOSE YOUR SPECIFICATION



Videos

Keep the Job Moving when a connection hole is undersized

VersaDrive™ Reamers perform the fastest and with less kickback when adapted for use with an Impact wrench for enlarging holes in steel plate up to around 3/4" thick. However, they can also be used in any standard 1/2" cordless or pistol drill chuck or adapted for use in a slow speed Magnet Drill. Ideal for use on plate heavier than 3/4" thick. 

VersaDrive™ reamers are not recommended for use with laser or plasma cut holes. The heat affected holes can be enlarged using the VersaDrive reamer with a slow speed magnet drill.

  • Precision 6-Flute design for a smooth cut on structural steel. 
  • Safer reaming with minimal kickback; specially hardened for impact wrench use.
  • High-Grade Tool Steel with ground flutes for high accuracy & long life
  • GoldMax low friction Titanium Coating to stop heat burn out
  • High Strength, Non-slip shank design 

 

  • HMT Reamers Impact Data & Best Practice Guide

  • 501030 HMT Versadrive Reamers DATA SHEET

  • Related Products

    Scroll To Top