The first eight videos in our new HMT Training Video Series are now available on YouTube, covering Versadrive impact cutting best practice and seven tools from the range.
Whether you use Versadrive yourself, support customers with product selection or want to build your team's product knowledge, these short videos offer a convenient starting point. Each runs for around two minutes, so you can watch the opening series in one sitting or go straight to the topic you need.
Versadrive Impact Cutting: General Best Practice
Start with our general best practice video before exploring the individual tool explainers below.
Versadrive Impact Reamers
Get to know Versadrive Impact Reamers with this focused introduction, the shortest episode in our opening set.
Versadrive Step Drills Explained
Take a closer look at Versadrive Step Drills in this dedicated product explainer.
Versadrive TurboTip Drill Bits Explained
Continue your introduction to the range with our video on Versadrive TurboTip Drill Bits.
Versadrive TurboTip ImpactaStep Cutters Explained
This episode puts the spotlight on Versadrive TurboTip ImpactaStep Cutters, adding another tool to your product knowledge.
Versadrive Impact Taps Explained
Explore Versadrive Impact Taps with this dedicated introduction to the range.
Versadrive DrillTaps: Best Practice
Build your product knowledge with our best practice video on Versadrive DrillTaps.
Versadrive TurboTip ConeCutters: Best Practice
Complete the opening eight videos with our best practice introduction to Versadrive TurboTip ConeCutters.
Watch, share and keep learning
Use these videos as a refresher, share them with colleagues or include them in your team's product training.
These are the first eight episodes, with more training videos planned. Bookmark this post to return to this opening set, and subscribe to the Holemaker Technology YouTube channel to keep up with future releases.