VersaDrive™ Reamers

24.95
£24.95
Keep the Job Moving when a connection hole is undersized VersaDrive™ Reamers perform the fastest and with less kickback when adapted for use with an Impact wrench for enlarging holes...

Keep the Job Moving when a connection hole is undersized

VersaDrive™ Reamers perform the fastest and with less kickback when adapted for use with an Impact wrench for enlarging holes in steel plate up to around 20mm thick. However, they can also be used in any standard 1/2" cordless or pistol drill chuck or adapted for use in a slow speed Magnet Drill. Ideal for use on plate heavier than 20mm thick. 

VersaDrive™ reamers are Not recommended for use with laser or plasma cut holes. The heat affected holes can be enlarged using the VersaDrive reamer with a slow speed magnet drill.

  • Precision 6-Flute design for a smooth cut on structural steel. 
  • Safer reaming with minimal kickback; specially hardened for impact wrench use.
  • High-Grade Tool Steel with ground flutes for high accuracy & long life
  • GoldMax low friction Titanium Coating to stop heat burn out
  • High Strength, Non-slip shank design 

Related Products

Scroll To Top